| PHYSICAL PROPERTIES | |||||||
| Product Name | Chemical Composition | Total Solids (+/-1) | pH Value | Viscosity (Cps) | Tg * (°C) | MFFT* (°C) | Applications |
| KEMILINE CE 930 | S/AC | 58 | 6,5 - 9,0 | 300 - 1000 | -10 | <0 | Cement Modifiers, Roof coatings, Crack fillers, Moisture barriers, Caulks |
| KEMILINE CE 910 | S/AC | 57 | 6,0 - 9,0 | 150 - 1200 | -6 | <0 | Cement Modifiers, Roof coatings, Crack fillers, Moisture barriers, Tile adhesives |
| KEMILINE CE 911 | S/AC | 57 | 6,0 - 9,0 | Max.6000 | -23 | <0 | Cement Modifiers, Roof coatings, Crack fillers, Moisture barriers, Caulks |
| KEMILINE CE 903 | S/AC | 50 | 7,0 - 9,0 | 2000 - 8000 | -6 | <0 | Cement Modifiers, Roof coatings, Crack fillers, Pasty tile adhesives |
| KEMILINE CE 756 | S/AC | 50 | 6,0 - 9,0 | 5000 - 15000 | -3 | <0 | Crack fillers, Elastic coatings, Moisture barriers, Pasty tile adhesives |
| KEMILINE CE 757 | S/AC | 50 | 7,0 - 9,0 | 2000 - 8000 | -2 | < 0 | Crack fillers, Elastic coatings, Moisture barriers, Pasty tile adhesives |
| KEMILINE CA 801 | S/AC | 30 | 6,0 - 9,0 | Max. 100 | 8 | 2 | Crack / Stain fillers, Elastic coatings, Moisture barriers |
| KEMILINE CE 101 | S/AC | 50 | 7,0 - 9,0 | Max. 800 | -22 | <0 | Cement Modifiers, Roof coatings, Crack fillers, Moisture barriers, Caulks |
| KEMILINE CE 701 | AC | 47 | 9,0 - 10,0 | Max. 400 | 15 | 10 | Crack fillers, Elastic coatings, Moisture barriers |
| KEMILINE CE 902 | S/AC | 53 | 7,0 - 9,0 | Max. 1500 | -35 | <0 | Cement Modifiers, Roof coatings, Crack fillers, Moisture barriers, Caulks |
| KEMILINE CE 917 | S/AC | 55 | 6,0 - 9,0 | Max. 1000 | -6 | <0 | Cement Modifiers, Roof coatings, Crack fillers, Moisture barriers, Caulks |
| KEMILINE CE 901 | AC | 50 | 7,0 - 9,0 | Max. 12000 | 20 | 20 | Pasty tile adhesives, Caulks |
| KEMILINE CE 704 | AC | 50 | 6,0 - 9,0 | Max. 600 | 10 | 9 | Crack fillers, Elastic coatings, Moisture barriers, Tile adhesives |
| İtalic characters coded products are under development | |||||||
| (*) : These are typical properties of the emulsions and should not be considered as specifications. Certificates of the analysis (COA) are available upon request. | |||||||
| AC : Pure Acrylic Copolymers | VA/AC : Vinyl Acrylic Copolymers | Viscosity : Brookfield viscosity, mPa.s | |||||
| S/AC : Styrene Acrylic Copolymers | VA/Veova : Vinyl Acetate / Veova Copolymers | Tg (°C) : Glass transition temperature | |||||
| PVA : Poly Vinyl Acetate Polymers | VV/AC : Vinyl Versatate / Acrylic therpolymer | MFFT (°C) : Minimum film formation temperature | |||||
